RCA SPS36073 - Manual (Page 28)

27
LiSTENiNG TO ThE RADiO
Presetting Stations
The unit can store a total of 60 stations in memory (30 FM, 30 AM). Presetting allows you to tune in to a
station directly.
Tuning in to a Station manually
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote
control) until the radio frequency appears on the front panel display.
2. Press the /AM/fM button to select AM or FM.
3. Press the TUNiNG buttons on the remote control to tune in to
a desired station.
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the /AM/fM button to select AM or FM.
3. Press the number button on the remote control to select the preset number.
Tuning in to a Preset Station
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the /AM/fM button to select AM or FM.
3. Press the PREV/ NExT button repeatedly to select the number of the preset station or use the
numeric buttons to enter the number of the preset station.
Searching for a Station Automatically
• Press and hold the CH / CH button on the front panel or the TUNiNG buttons on
the remote control until the tuner starts searching for a station, then release. After tuning in a station, the
search stops.
• The search may not stop at a station with a very weak signal.
4. Press the TUNiNG buttons to tune in to a desired station.
5. Press the MEMORy button twice on the remote control.
6. Repeat steps 2-5 to store other stations.
Fm Stereo
Press the MTS button on the remote control until “ ” appears on the
front panel display.
Weak Fm stations
Press the MTS button on the remote control until “ ” appears on the
front panel display. Background noise will be reduced. To restore stereo
reception, press the
MTS button on the remote control to select “ ”.
• For preset numbers 1 to 9, simply press the number button on the remote control.
• For preset numbers 10 to 30, enter the two-digit numbers.
For example, to enter 18 by pressing “1” & “8”.
• When MUTE is pressed, the sound is mute and the “ ” indicator
always blinks on the LCD display until MUTE is pressed again or VOL
is pressed.
For Better Reception
FM: Fully unwind the FM antenna wire. Then extend the FM antenna wire and place it in the position that
sounds best.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.
NOTE: Do not connect the FM antenna to an outside antenna.
RCA SPS36073 English IB W012 OK.indd 28 8/21/2009 4:48:05 PM