Using the tv – RCA SPS36073 User Manual

Page 24

USiNG ThE TV

Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal before searching

TV channels

Scanning for Tv Channels Automatically (Only appears to the first time Power On)

1. Connect the TV antenna.
2. Connect the AC power cord.
3. Press the

ON/Off button to turn on the unit.

4. Press the

DVD/TV/RADiO button (the fUNCTiON button on the remote)

to select TV mode.

5. Press the

ENTER button to proceed with auto scan.

6. Use the or button to select “CATV” or “AIR”, then press the

ENTER

button to start auto scan.

7. The unit will immediately search all channels for those with adequate

signal strength and store those channels with signals in memory. The unit
will take a short minutes to finish auto scan and after this is completed,
the unit will switch to the first channel found.

Proceed with auto scan?

Please select Antenna type

RF CH

PRESS MENU TO EXIT AUTO SCAN

Found

manual Searching for Tv Channels

1. Press the

TV MENU button, then press the button to TV

CHANNEL SETTING.

2. Press the

button to select ANTENNA. Use the or button

to select

Air or CATV.

3. Use the

button to select Auto Scan.

4. Press the

ENTER button to enter sub menu of Auto Scan.

5. Use the

button to select “Start to Scan” in the sub menu.

6. Press the

ENTER button to start the search for TV channels.

7. The screen will show the first received channel when auto search is completed.

Watching Television

Viewing a television station after the auto/manual search for channels.
1. Press the

fUNCTiON button to TV mode.

2. Press the

Ch buttons to select a channel, or press the number button on the remote to select the

channel you want to watch.

• For channels 1 to 9, enter one-digit channel number.
• For channels 10 to 99, enter the two-digit channel number.
• For channels 100 or over, enter three-digit channel number.

NOTE:
• When a channel is selected, the channel number is displayed on the top right corner of the screen. This

number will disappear after a few seconds.

• When

MUTE is pressed, the sound is mute and the “

” indicator always blinks on the LCD display until

MUTE is pressed again or VOL is pressed.

ATSC TV mode:

Press the

DiSPLAy button, the upper window will

pop up, then press the

DiSPLAy button again,

the lower window will pop up. Press the

DiSPLAy

button once to exit.

NTSC TV mode:

Press the

DiSPLAy button, the upper window will

pop up, then press the

DiSPLAy button once to

exit.

RCA SPS36073 English IB W012 OK.indd 24

8/21/2009 4:47:58 PM