Cd operation – Roadmaster VRCD220S User Manual

Page 13

CD Operation

Electronic Skip Protection - 12 or 45
seconds
Electronic Skip Protection is ideal for driv-
ing on rough roads. Press the “SEL” Button
until the display will show “TA SEEK”. Then
press the “SEL” Button to cycle through
the menu until “ESP12” is displayed indi-
cating that 12 seconds Electronic Skip
Protection will be activated.
With “ESP 12” on the display, use the VOL
“+/-” Buttons to change the setting to “ESP
45”, indicating that 45 seconds Electronic
Skip Protection is activated. Leave the unit
idle for the new setting to take effect.

1. Insert/Eject CD
Insert a disc with MP3 into the CD slot with
label side up. The disc will be automatically
loaded into the unit, even when it is off or
in radio mode. The word “MP3 DISC” will
be displayed
as the CD is loaded. The first file in the root
folder will be played. As the file is playing
“ROOT” will be displayed first, then the if
there is any ID3 information that will be
displayed as the file is playing. Press the
EJECT Button to eject the disc from the
slot. If the disc is not removed from the
slot within 5 seconds, it will automatically
be loaded into the slot again. When the
disc is ejected and removed, the unit will
automatically switch to radio mode.

2. Selecting Tracks
On the Head Unit, press the SEEK >>|
Button to advance CD to the next track.
Track numbers will be shown on the dis-
play. Press and hold SEEK >>| to fast
forward. Press the SEEK |<< Button to go
to a previous track. Track numbers will be
shown on the display. Press and hold the
SEEK |<< Button to fast reverse. Disc will
play normally when the SEEK >>| or SEEK
|<< Button is released. On the Remote
Control, use the |<< or >>| Buttons.

3. Play/ Pause CD
Press the No.1 Button to pause the CD.

Press this button again to resume play-
back.

4. Scanning Tracks
Press the No.2/INT Button to play the first
10 seconds of each track. Press this but-
ton again to resume playback.

5. Repeat
Press the No.3/RPT Button to repeat the
same track continuously. “RPT ON” will
appear on the display. Press this button
again to stop repeating.

6. Random
Press the No.4/RDM Button to play all the
tracks in random order. “RDM ON” will
appear on the display. Press this button
again to stop random play.

VRCD220S English PROOF Manual.indd 13

10/15/08 11:34:18 AM