RCA RP-9380 - Manual (Page 9)

7
Tuner controls and operations
GENERAL CONTROLS
STAND BY
The STAND BY indicator light stays on as long as the system is plugged in and the power is turned on and off by the
remote control. When you activate/deactivate the system via the POWER button on the unit, the light automatically
goes off.
POWER ON/OFF
The POWER button on the unit or on the remote activates the system. The system will default to the last mode it was
in before power was removed.
IRS
In the middle of the LCD is the Infrared Remote Sensor. This feature enables use of the remote control to operate
the system. The remote control will not work if the IRS is blocked or covered in any way.
FUNCTION BUTTONS
The function buttons are located just below the IRS. They are CD, TUNER, TAPE, TV, VCR 1 and VCR2•LD, which
corresponds to the VCR2•LD on the remote.
VOLUME
The VOLUME dial regulates the level of audio output. To increase output, rotate the dial to the right. To decrease
output, rotate the dial to the left.
TUNING
The TUNING UP (+) and DOWN (-) buttons allow you to find the radio station of your choice.
PRESET
The PRESET UP ( ) and DOWN ( ) buttons allow you easy access for up to 24 preset radio stations.
BAND
The BAND button switches between AM and FM frequencies.
FM MODE
The FM mode improves FM reception by switching between Stereo and Mono.
NOTE: A radio station must be broadcast in stereo for you to receive it in stereo.
STAND BY TUNING
PRESETS
BAND
FM MODE
CENTER LEVEL
CENTER LEVEL
TEST TONE
CD
CUSTOM REMOTE SENSOR
ROCK
CLASSIC
POP
PRO LOGIC
3 STEREO VOLUME
HALL
SIMULATED
BYPASS
NORMAL
PHANTOM
WIDE
TUNER TAPE TV MIN MAX VCR 1 VCR 2 LD
EQ MODE
REAR LEVEL
REAR LEVEL
BALANCE BASS TREBLE
SURROUND MODE
CENTER MODE MEMORY
PHONES MIC
POWER