RCA RP-9380 - Manual (Page 13)

11
CD controls and operations
GENERAL CONTROLS
search
The SEARCH forward and reverse buttons allow you to search two different ways:
• Search the current track while disc is playing.
• Search the current track while the Repeat mode is active for that track.
The Search mode works in two different speeds - normal and fast. To activate normal speed, simply press the
SEARCH button and release. To initiate a faster search, hold the SEARCH button down for two seconds.
Repeat
The REPEAT button allows you to repeat the current track, the whole disc or the entire programmed play sequence.
The Repeat mode can be combined with Play, Program or Random modes. REPEAT will show in the display if your
choice is to repeat the current track. REPEAT will flash in the display if your choice is to repeat the whole disc or the
entire programmed play sequence.
Program
Only one disc at a time can utilize the Program mode, but up to 20 tracks can be programmed to play in whatever
sequence you choose.
RANDOM
The RANDOM button allows you to play all the tracks on the current disc in a random sequence. RANDOM will show
in the display.
NOTE: Your system cannot play random tracks from more than one disc in the tray. Instead, when it has finished
the tracks on the current disc, it will attempt to randomly play tracks on the next disc, etc.
disc skip
The DISC SKIP button allows you to rotate to the next disc - provided there is more than one disc in the tray - while
in the Play or Stop mode. If no disc is present, the display will show no disc followed by a steady “-------------”.
SIMULTANEOUS PLAY AND LOADING SYSTEM
SEARCH
PROGRAM REPEAT RANDOM PAUSE STOP PLAY
DISC SKIP
TRACK
OPEN/CLOSE