Radio Shack TAD-799 - Manual (Page 17)

17
USING REMOTE
COMMANDS
Follow these steps to operate the TAD
from a touch-tone phone or a pulse (ro-
tary) phone with a pocket tone dialer.
1. Dial your phone number.
2. When the TAD answers, enter your
remote operation security code.
The TAD beeps once to confirm that
you entered the correct code.
Notes:
• If you do not enter each digit of
the security code within 8 sec-
onds, the TAD hangs up.
• Even if the TAD is not set to
answer calls, it will answer after
about 60 seconds.
3. Enter a remote command (see
“Remote Commands” on Page 18).
4. When you finish, simply hang up.
43-799.fm Page 17 Monday, August 16, 1999 9:43 AM