Radio Shack TAD-799 - Manual (Page 11)

11
BASIC OPERATION
SETTING THE NUMBER
OF RINGS
The ring select switch on the bottom of
the TAD controls how long the TAD-799
waits before it answers a call. Slide the
switch to the appropriate position.
4 — The TAD answers after four rings.
7 — The TAD answers after seven rings.
TS (Toll Saver) — If there are new mes-
sages, the TAD-799 answers after two
rings. Otherwise, the TAD answers after
four rings.
SETTING THE TAD TO
ANSWER CALLS
To set the TAD to answer calls, press
ANSWER .
• If an outgoing message is
recorded, the TAD announces,
“Answer on,” and the display lights.
• If no outgoing message is re-
corded, the TAD says, “Answer off,
no announcement.” You must
record a message (see “Recording
the Outgoing Message” on
Page 10).
To have the TAD not answer calls,
press
ANSWER again. The TAD says
“Answer off,” and the display turns off.
43-799.fm Page 11 Monday, August 16, 1999 9:43 AM