Renesas M3T-FLX-DMY613 - Manual (Page 4)

1. Description
2. Package Components
(see Figure 1)
(1) M3T-FLX-DMY613 conver ter board
Figure 1 Package components of M3T-FLX-DMY613
FLX-DMY613 main unit
(2/3)
4. Application
(see Figure 2)
Mount the DUMMY80S to the socket on the target. On top
of it, mount the socket frame and M3T-FLX-DMY613 in
that order. Then connect the emulation pod to the
connector provided at the top of the M3T-FLX-DMY613.
Figure 2 Usage of M3T-FLX-DMY613
3. Specifications
Table 1 Specifications
6. External Dimensions of M3T-FLX-DMY613
: positions of No. 1 pin
Be sure to match the position of
No. 1 pin of the foot pattern and
each part. (2) M3T-FLX-DMY613 User's Manual (this manual)
Emulation pod for
M16C/60
Series
MCUs
M3T-FLX-DMY613
5. Connection Procedure (see Figure 2)
(3)
(1) Mount the socket on the target.
(4) Connect the emulation pod for M16C/60
Series MCUs and the M3T-FLX-DMY613.
(5) Connect the DUMMY80S and the M3T-FLX-DMY613.
A
Symbol
B
C 25.0
12.5
10.0
D
M 6.3
25.0
Figure 3 External dimensions of M3T-FLX-DMY613
50 26
1 25
50 26
1 25
J1
J2
M3T-FLX-DMY613 REV.A
MADE IN JAPAN
A
M
D
B
C
(1)
M
M3T-DUMMY80S
Socket
Socket frame
(2) Mount the M3T-DUMMY80S on the socket.
(3) Attach the socket frame to the socket.
(2)
(4)
(5)
The M3T-FLX-DMY613 is used to convert the emulation
pod for M16C/60
Series MCUs to the pin assignments
of 80-pin 0.65mm pitch QFP ( PRQP0080JA-A ) to
connect the FLX100 and M3T-DUMMY80S.
(80-pin 0.65mm pitch QFP)
Item Description
Package
Applicable MCU M16C/60 Series
Insertion/removal
iterations of
connector
20 times guaranteed
Dimension [mm]
PRQP0080JA-A (formerly: 80P6S-A)