Roberts Radio CR9970 - Manual (Page 5)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
5
Switching on and setting the time
Before using your CD clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket
and switch on at the wall socket.
2. The clock display will show 12:00. Ensure that the Alarm 1 and
Alarm 2 function switches are set to the 'Off' position.
3. Whilst holding down the Time Set button press the F.Fwd button
to increase the time at a fast rate. The S.Fwd button will increase
the time at a slow rate. The F.Rev and S.Rev buttons decrease the
time at fast and slow rates. Release the buttons when the correct
time is reached. The clock uses a 12 hour display with a PM
indicator. Ensure that the correct 12 hour cycle is selected.
2
3
3 3 3 3
2
cr9970 instruction book.PMD 6/11/2004, 10:57 AM 5