Roberts Radio CR9970 - Manual (Page 14)

14
Setting the alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your
CD clock radio has 2 separate alarms which can be set to activate at
different times.
Setting Alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position. Alarm 1 time
will show in the display.
2. Press the F.Fwd button to increase the time at a fast rate. The
S.Fwd button will increase the time at a slow rate. The F.Rev and
S.Rev buttons decrease the time at fast and slow rates. Release the
buttons when the correct time is reached. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
3. Slide the Alarm 1 function switch to the 'On' position. The display
will revert to showing time and the Alarm 1 indicator will light.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
1
2 2 2 2
3
cr9970 instruction book.PMD 6/11/2004, 10:57 AM 14