RCA CDRW10 - Manual (Page 17)

Chapter 3: Recording CDs
Chapter 3 15
Copying a CD
You can use this feature to easily copy an entire CD.
1. Put the disc you want to copy in tray A.
2. Put a blank disc in tray B (music or audio CD-R/ CD-RW only. The recoder does
not accept standard computer CD-ROMs).
3. Press MAKE CD, then PLAY/PAUSE on side B of the unit (MAKE CD and REC
appear).
The disk will be automatically finalized when copying is done.
• To stop recording, press STOP.
• To check the remaining recording time, press REMAIN.
Checking Remaining Record and Play Time
You can check the remaining record time left on a disc in tray B or check the remaining
play time for both discs.
Record Time
Press the REMAIN button repeatedly to show the remaining record time (the display
toggles through elapsed time, total record time of the disc, and total remaining time of
the disc).
Play Time
Following the remaining record time displays for disc B, you’ll see the remaining play
time displays for disc A. It loops continually from disc B to disc A.
Press the REMAIN button repeatedly to show the remaining play time (the display
toggles through elapsed time, total play time of the disc, total remaining play time of the
disc, and remaining time of the current track).
15920520.03 Recording CDs 9/24/02, 3:55 PM 15