Ricoh LF 125 (H915) User Manual

Page 369

A.10

OTES

• You may experience jams when using print materials with a length of less than 127

mm (5 in.). For optimum performance, ensure that you are storing and handling the
paper correctly. Please refer to “Paper Storage Environment” on page .12.

• Capacity may vary depending on print materials’ weight and thickness, and

environmental conditions.

Guidelines for Using Paper

For best results, use conventional 75 g/m

(20 lb) paper. Ensure that the paper is of

good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled
paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage
to the machine:

Labels
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)

120 to 150 g/m

1 sheet of paper for the
manual feeder

Transparency films
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)

138 to 146 g/m

Card stocks
A6 card (105 x 148/4.13 x 5.88)
Post Card (101.6 x 152.4/4 x 6)
Hagaki (100 x 148/3.94 x 5.83)

90 to 163 g/m

Minimum size (custom)

60 to 120 g/m

bond

(16 to 32 lb)

Maximum size (Legal)

Symptom

Problem with Paper

Solution

Poor print quality or toner
adhesion, problems with
feeding

Too moist, too rough, too
smooth or embossed; faulty
paper lot

Try another kind of paper,
between 100 ~ 400 Sheffield, 4
~ 5 % moisture content.

Dropout, jamming, curl

Stored improperly

Store paper flat in its moisture-
proof wrapping.

Increased gray background
shading/machine wear

Too heavy

Use lighter paper, use the rear
output slot.

Size (mm/in.)

Weight

Capacity