RCA DTA809L - Manual (Page 7)

EN
7
General controls
• The keys on the Converter Box remote control are divided into two parts. The keys shown in white in the diagram
below control the Converter Box, while the grey keys control your TV set.
• You can control TV sets of all major brands after programming this remote control with the PGM key. RCA TV sets can
be controlled directly without programming. Refer to “Program the supplied remote control” section for details.
TV controls ONLY
Turns the TV on or off
Selects CH3, CH4 or AV INPUT on the TV
Mutes or restores sound output from the
TV (if the TV supports this function)
Adjusts the TV volume
Programs the remote control so that it can
control your TV set. Refer to “Program the
supplied remote control” for details
Signal indicator
Turns the converter box on or off
Navigates through the converter box
menus (e.g., to move right, press )
Press OK to confi rm menu selections
Shows or hides channel information (it is
possible to receive some programs from
diff erent time zones, the time information
might be wrong in this case)
Shows or hides the main menu
Selects the previous or next channel
Selects channels by inputting the channel
number
Shortcut keys to access functions in the
main menu
Displays closed captioning from the
converter box
Inputs a dash (e.g., 12-1) while selecting
an ATSC channel with the number keys
(0-9)
Insert 2 “AAA” batteries
prior to use.