Radio Shack 63-1028 - Manual (Page 8)

8 Preparation
Note: If the thermometer does not oper-
ate after you install the batteries, simply
remove and re-install them.
MOUNTING
You can place the thermometer on a flat
surface, or mount it on the wall using the
supplied screw. For measuring the out-
side temperature, the thermometer’s sen-
sor cord extends up to 9.8 feet (3
meters). You can easily mount the sensor
to a flat surface on an outside location
(such as a window) by using the supplied
suction cup.
Selecting a Location
Choose a location indoors near a window
through which you can route the remote
sensor cord outside.
63-1028.A.fm Page 8 Monday, October 9, 2000 9:07 AM