Radio Shack 63-1028 - Manual (Page 18)

18 Operation
3. Repeatedly press MODE until the
current temperature appears.
To clear all indoor and outdoor maximum
and minimum temperature alarm set-
tings, use a sharp object such as a
straightened paper clip to press
RESET
on the back of the thermometer. The
thermometer beeps three times and
-
188.8 appears, then the current tem-
perature appears.
Setting the Alarm
The thermometer sounds an alarm when
either the indoor or outdoor temperature
goes above or below the temperature
alarm setting.
To turn on the alarm, press ALARM ON/
OFF . The thermometer says “alarm on”
and appears. When the tempera-
63-1028.A.fm Page 18 Monday, October 9, 2000 9:07 AM