Ricoh Small Cubic Type 5.0 Mega Pixel CCD Monochrome PoCL Camera Link Camera FV-L500B1 - Manual (Page 30)

30/31
FV-L500B1
User’s Guide Rev. 1.01
Command No. Command Descriptions
79H:
EFFCT[7 0]
[Image effect selection] Initial data: EFFCT[7..0] = 0
Sets the image effect.
D[7..0]
D7 D6 D5 D4 D3 D2 D1 D0
00H: No effect (Original video) 01H: 11bit gradation
02H: 10bit gradation 03H: 9bit gradation
04H: 8bit gradation 05H: 7bit gradation
06H: 6bit gradation 07H: 5bit gradation
08H: 4bit gradation 09H: 3bit gradation
0AH: 2bit gradation 0BH: 1bit gradation
0C to FEH: No function
FFH: MSB-LSB reverse
80H:
E2P[7 0]
[EEPROM control] Initial data: E2P[7 0] = 0
Sets the image effect.
D[7..0]
D7 D6 D5 D4 D3 D2 D1 D0
D7~D2: No function Always set as “000000”
D1: Register synchronous update with the EEPROM data 0: Prohibited 1: Accept
D0: Write control to the EEPROM 0: Prohibited 1: Accept
F0H:
OUTSEL[7 0]
[EEPROM control] Initial data: OUTSEL[7 0] = the value of C0H
Sets the image effect.
D[7..0]
D7 D6 D5 D4 D3 D2 D1 D0
D7~D4: No function Always set as “000000”
D3~D0: The signals of the power/IO
connector selection
Please refer to “The Signals of the Power/IO Connector”
Initial data: 0000, data range: 0000~0111