Using the projector – Radio Shack Projection 12-591 User Manual
Page 14
14
O
pe
ra
ti
on
. Adjust the sound control on your device.
4. Press POWER to turn off the radio.
Using the Projector
Project the current time, date, or radio frequency on a wall or ceiling, and rotate
the projection +/- 90 degrees.
• AUTO – The projection brightness changes according to the ambient brightness.
In order for auto light detection to work properly, make sure you do not cover or
obstruct the light sensor (see page 8.)
• OFF – When projection is OFF, press LIGHT/SNOOZE to briefly project the
image, it lights about 10 seconds.
• HI – High brightness.
• MED – Medium brightness.
• Image Rotate – Rotate the image to the desired angle.
• Projection Focus – Adjust the image until a clear projection appears on a wall
or ceiling.
See also other documents in the category Radio Shack Clock:
- Chronomatic-278 (14 pages)
- 63-996 (2 pages)
- 63-969 (16 pages)
- AM/FM PLL CLOCK/TABLE RADIO 12-1632 (8 pages)
- 63-5086 (2 pages)
- 63-992 (12 pages)
- 63-504803A03 (2 pages)
- 65-792 (4 pages)
- 04A01 (4 pages)
- 63-993 (2 pages)
- 63-248 (1 page)
- 63-255 (14 pages)
- 63-991 (4 pages)
- 63-955 (4 pages)
- 63-963 (21 pages)
- 63-973 (12 pages)
- 63-5103 (4 pages)
- 63-994 (2 pages)
- 63-5026 (4 pages)
- ACR-326 (16 pages)
- 63-246 (2 pages)
- TRAVEL SLEEP MACHINE 63-974 (16 pages)
- 63-1415 (2 pages)
- 63-1419 (1 page)
- 63-267 (1 page)
- 63-1420 (2 pages)
- CHRONOMATIC-312 (20 pages)
- 63-1413 (2 pages)
- 63-251 (1 page)
- 06A00 (4 pages)
- 63-1128 (1 page)
- CR-320 (8 pages)
- 63-245 (1 page)
- 63-1416 (4 pages)
- 12-519 (24 pages)
- 63-960 (6 pages)
- 63-1088 (1 page)
- 63-968 (20 pages)
- 63-247 (2 pages)
- 63-987 (3 pages)
- 63-995 (2 pages)
- 63-117 (1 page)
- 12-220 (4 pages)
- 63-1411 (2 pages)