RoyalTek RFG-1000 - Manual (Page 13)

13
RoyalTek GPS Driver User Guide(PC version)
This version provides the RoyalTek GPS Driver program that make the RFG-1000
working at PC.
Hardware Status:
Display the hardware status, which is one of the following conditions:
1) RoyalTek USB Cable GPS: RFG-1000 with USB interface.
2) Royaltek serial cable device: RFG-1000 with RS-232 interface
3) No hardware detected.
GPS(NMEA) Output:
GPS Port. You should assign this COM port for map or navigation software.
Satellite status:
Display the RFG-1000 status, which is one of the following conditions:
1) Green : Show green color when the program is running., and the position is
fixed.(2D or 3D)
2) Red : Show red color when the program is running, but the position is not fixed.
3) Grey : Show gray icon when the program is not running.
Running Time:
Display GPS running time from power on.