Nokia 2270 - Manual (Page 56)

[ 51 ]
Advanced features
• USE TOUCH TONES
Touch tones (sometimes known as DTMF tones) are those tones produced when you press the
keys on your phone keypad. You can use touch tones for many automated dial-up services such
as banking and airlines, or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from your phone keypad,
or send them automatically by saving them in your phone.
Set manual touch tone options
You may customize the way your phone sends the touch tones for optimum performance with
the system you are calling.
SET TOUCH TONE TYPE
1 Press Menu 4-2-2-1 (Settings > Phone settings > Touch tones > Manual touch tones).
2 Select one of the following options, then press Select:
SET FIXED TOUCH TONE LENGTH
You can also specify touch tone length when using the Fixed option.
1 Press Menu 4-2-2-2 (Settings > Phone settings > Touch tones > Touch tone length).
2 Scroll to Short (1 /10 second) or Long (1/2 second), then press Select.
Send a touch tone string manually
Before you begin, make sure that Manual touch tones is not set to Off.
1 During a call to the automated service, press Options, scroll to Touch tones, and press Select.
2 Enter the touch tone string from your phone keypad as required by the service you are
calling, then press Tones.
Option Description
Rename group Renames the selected caller group.
Group ringing tone Selects a ringing tone for this group. Scroll through list of ringing
tones, then press OK.
Group logo Views, activates or deactivates the group logo.
Group members Assigns other phone book entries to the selected caller group.
Option Description
Continuous Tone sounds for as long as you press and hold a key.
Fixed Sends tones of the duration you specify in the Touch tone
length option.
Off Turns off tones. No tones are sent when you press a key.