NISSAN 2010 Murano - Manual (Page 36)

34
VOice cOMMAnd uSAGe
Making a Phone Call
1. Press the switch on the steering wheel. The system
responds with, “Would you like to access Phone,
navigation, information or Help?” The commands are
also displayed on the screen.
2. After the tone, say “PHOne.”
3. The system then displays the four available phone
commands and says: “Please say dial number, Redial,
Phonebook or international call.”
4. After the tone, do one of the following:
Say “diAL nuMBeR” to dial a 7- or 10-digit phone
number only. Then, follow the prompts to begin saying
the phone number, starting with the area code.
After the phone number, has been recognized, say
“diAL.” if incorrect, say “cHAnGe nuMBeR.”
Say “RediAL” to hear the last number dialed and
begin dialing.
Say “PHOneBOOk” to say a voicetag or a number
from the displayed list.
Say “inTeRnATiOnAL cALL” to dial a number longer than 10 digits.
Receiving/Ending a Phone Call
There are no voice commands for receiving or ending a phone call.
To accept the call, press the switch on the steering wheel or
touch the “Answer” key on the display. To reject the call, select
the “Reject call” key. To hang-up, push the switch, or select
the “Hang-up” key.
Pressing the switch during a connected phone call will allow
you to send digits and special characters. After speaking the
desired digits, press the ENTER button to send the recognized
information.
Setting a Destination to a Street Address
1. Press the switch on the steering wheel.
2. The system responds with “Would you like to access
Phone, navigation, information or Help?”
3. Say “nAViGATiOn.”
4. The system announces, “Please say Address, Places,
Home or Previous destinations.”
5. Say “AddReSS.”