beautypg.com

Moonroof controls (if so equipped), Power liftgate (if so equipped) – NISSAN 2010 Murano User Manual

Page 20

background image

18

MOONROOF CONTROLS (if so equipped)

The ignition switch must be in the On position to operate the
moonroof controls.

SLidinG SunSHAde And MOOnROOf

When the moonroof switch is pushed to the OPEN position

02

, the front and rear sunshades will fully open. When the

switch is pushed again, the moonroof will fully open.

When the moonroof switch is pushed to the CLOSE
position

04

, the moonroof will automatically close. Push

the switch again, the front and rear sunshades will close.

When the moonroof switch is pushed to the second detent
to the OPEN position

01

or CLOSE position

05

, both

the sunshades and moonroof will open or close.

To stop the sunshades or moonroof during the operation, push the moonroof switch to the
OPEN

02

, CLOSE

04

or PUSH TILT

03

positions.

TiLTinG MOOnROOf

To tilt the moonroof up, push the moonroof switch to the PUSH TILT position

03

.

To tilt the moonroof down, push the switch to the PUSH TILT position

03

or push the

switch to the CLOSE position

04

.

When the moonroof is tilted up, push the moonroof switch to the second detent to the
CLOSE position

05

, the moonroof will tilt down and the sunshades will close.

POWER LIFTGATE (if so equipped)

To open, close or reverse the liftgate, the transmission lever must be in the
P (PARk) position. The power liftgate can be activated by:

Pushing the power lift gate button on the keyfob for more than 1.5 seconds.

Pushing the power lift gate switch on the instrument panel.

Pushing the lift gate opener switch.

The main POWER DOOR ON/OFF switch

A

must be on to close the lift gate with the rear pillar
button

B

.

A

B

01

02

03

04

05

This manual is related to the following products: