Detecting the external sync signal source – Nvidia Quadro FX 5500 User Manual
Page 44
NVIDIA Corporation
40
Quadro FX 4500/5500 SDI User’s Guide– Version 2.0
C
HAPTER
4
Linux—Using the Graphics to Video Out Control Panel
Detecting the External Sync Signal Source
The software should automatically detect the external sync signal. When it does, the sync
format information appears in the Input Video Format text box.
If you have both SDI and Composite signals connected -
•
The software automatically chooses the SDI signal.
•
If you want to switch to the composite signal, click the Sync Format list arrow and
then click COMP Sync.
If the software fails to automatically detect the signal -
•
If the software loses the external sync signal or does not detect it
automatically, click Detect to force detection of the sync signal.
•
For composite signals, if the software is unable to automatically detect the correct
signal type–either bi-level or tri-level– click the Sync Format list arrow and then
click the COMP option corresponding to your sync source.