Nvidia Quadro FX 5500 - Manual (Page 31)

NVIDIA Corporation
Quadro FX 4500/5500 SDI User’s Guide – Version 2.0 27
C HAPTER 3
Windows–Using the Graphics to SDI Control Panel
Using SDI Under Dualview
In the default configuration, the SDI output is a clone of the display output. The NVIDIA
Quadro FX 4500 SDI graphics card also supports Dualview mode, where the desktop
extends across two monitors.
About Dualview Mode
Under Dualview mode, you can define one large desktop that extends from the display to
the SDI output. This lets you move windows between the SDI output and the graphics
(DVI) display part of the extended desktop.
With applications that use video overlay or Microsoft VMR, you can also display the
video full-screen on the SDI output.
Figure 3.8 Extended Desktop with Dualview Mode
The display and the SDI output do not need to be the same resolution and refresh rate.
Refer to the document
Quadro Workstation User’s Guide
for more information regarding
Dualview mode and the NVIDIA graphics drivers.
Area displayed on primary display Area displayed on the SDI output
Windows can be dragged
Use Full-Screen Video Mirror to present
from one display to the other.
a video overlay or Microsoft VMR video
full screen on the SDI output.