Nokia 6015 - Manual (Page 52)

S e t t i n g s ( M e n u 4 )
52 Copyright © 2004 Nokia. All rights reserved.
Display brightness
You can change the brightness of
your phone display.
1. In the standby mode, select Menu
> Settings > Display settings >
Display brightness .
2. Scroll left or right to adjust the
contrast level to your preference.
3. Press OK to accept your settings.
■ Tone settings
From this menu, you can adjust the
ringing volume, keypad tones, and
other tone settings for the currently
active profile. See
“Personalise a
profile”, 44 for more information on
profile settings.
■ Enhancement settings
The enhancement settings menu is
shown only if the phone is or has
been connected to a compatible
enhancement.
In the standby mode, select Menu >
Settings > Enhancement settings >
Headset , Handsfree , Loopset , or
Charger .
Headset
Scroll to the option of your choice,
and press
Select to enter the
submenu and modify its settings.
Default profile —Choose the profile
you wish to be automatically
activated when a headset is
connected.
Automatic answer —Calls are
answered automatically after one
ring when a headset is connected.
Select
On or Off .
Handsfree
Scroll to the option of your choice,
and press
Select to enter the
submenu and modify its settings.
Default profile —Choose the profile
you wish to be automatically
activated when your phone is
connected to a car kit.
Automatic answer —Calls are
answered automatically after one
ring when a car kit is connected.
Select
On or Off .
Lights —Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select
On or Automatic .
Loopset
The LPS-4 Loopset (for use with
T-coil equipped hearing aids) is
recommended for use with your
phone. Scroll to the option of your
choice, and press
Select to enter the
submenu and modify its settings.
Default profile —Choose the profile
you wish to be automatically
activated when a loopset is
connected.