Adsl2+ router, Mac set-up (cont), Mac user guide – NetComm NB6PLUS4W User Manual

Page 11

Text mode
Original mode

ADSL2+ Router

Mac User Guide

NB6Plus4W –

12.

Click on the TCP/ IP tab. The TCP/IP settings will be displayed. Click on the

“ConfigureiPV4” pop-up menu and select “Using DHCP”. Click on Apply Now to
save the changes.

Your dialog box should now look like this:

13.

If your Mac does not accept an IP address from the DHCP server in your

NB6Plus4W and the IP address field remains blank, try selecting “Using DHCP with
manual address” from the “Configure iPV4” pop-up menu and entering 192.168.1.3
in the “IP address” field.

14.

Click on the “Show” pop-up menu and select “Network Status”. Check to see that

the bullet alongside “Airport” is green.

15.

Close the Network window by clicking the red close button (System 10.3 and
10.4) or select “Quit System Preferences” under the “System Preferences” menu
(System 10.2).

Mac

Set-up

(cont)