NCR Customer Display NCR 5972 - Manual (Page 15)

Chapter 2:
Site Preparation
This chapter describes the installation process including site
considerations, operating conditions, mounting options, and
connections.
Physical Environment
The working range, storage, and transit environments are presented in
the following tables.
Working Range
Condition Range
Temperature 10°C to 40°C (50°F to 104°F)
Temperature Change 10°C (18°F) / Hour
Humidity Range 20% to 80% (No Condensation)
Humidity Change 10% / hour
Barometric Pressure 105,000 Pa to 69000 Pa
Note: Condensation may occur when equipment is transferred from
cold to warm areas during shipment. The equipment design shall
permit operation after condensation has occurred, a drying out process
has been accomplished, and the equipment stabilized to the operating
environment.