NEC NP41 - Manual (Page 80)

7
7. Maintenance
This section describes the simple maintenance procedures you should follow to clean the focus sensor, lens and
replace the lamp and the cooling pump.
➊ Cleaning the Lens and Focus Sensor
Cleanng the lens
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
Cleanng the focus sensor
Use a blower or lens paper to clean the focus sensor.
Keep finger prints off the focus sensor. Leaving finger prints in the focus sensor might cause poor focus or short
auto focus range.
➋ Cleaning the Cabinet
1. turn off the projector before cleaning.
2. Vacuum the ventilation inlet of the cabinet.
LAM P STA TUS POW ER
ON /ST AND BY
SOU RCE
AUT O ADJ . SEL EC T
FOC US
LAM P STA TUS POW ER
ON /ST AND BY
SOU RCE
AUT O ADJ .
SEL EC T
FOC US
LAM P STAT US POW ER
SOUR CE
AUTO ADJ.
SELE CT
ON/S TAN D BY
FOC US
VID EO IN
COMPU
TER I N
PC C ONT ROL
AUD IO IN
S-VID EO IN
CAUTION:
When cleaning the speaker us-
ing a vacuum cleaner, do not
force the brush of the vacuum
cleaner into the slits of the cabi-
net.
Applying strong pressure or pos-
sibly impacting the speaker may
cause a malfunction.