NordicTrack ViewPoint NTL13007.0 - Manual (Page 26)

26
5. Press the Power button again and save chan-
nels into the television’s memory.
When the Power button is pressed, the television
will begin scanning all of the channels available in
your area. When no cable signal is detected on a
channel, the channel will be skipped. When a
cable signal is detected, the channel will be saved
into memory and the next channel will be se-
lected. This process will continue until the highest
channel is reached.
Do not remove the key
while the television is scanning channels.
Note: If you are viewing channels through an ex-
ternal source such as a cable box or a VCR, the
television will only save the channel used by the
external source.
6. When you are finished using the information
mode, remove the key.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it monitors your heart rate during your work-
outs.
To purchase the optional chest pulse sensor,
call the telephone number on the front cover of this
manual.
HOW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
power cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the platform cush-
ions toward the front of the treadmill. To decrease the
firmness, slide the platform cushions toward the back
of the treadmill.
Note: Make sure that both cushions
are set at the same firmness level. The faster you
run on the treadmill, or the more you weigh, the
firmer the walking platform should be.
Platform
Cushion
Walking Platform
Increase
Decrease
Platform
Cushion