Nortec Industries Airfog Series - Manual (Page 49)

10-60
Page 42
2008-04-11
1. TROUBLESHOOTING
Table 1. Troubleshooting
Part Possible Failure Symptoms Solution
Vacuum Valve Diaphragm Failure Nozzle sputter.
Low output.
No output.
Replace defective
component.
Pilot Safety Regulator
Diaphragm Ripped Nozzles sputter.
Air in water line.
Low output.
No Output.
Water drips from bonnet.
Repair regulator using
repair kit.
Valve Seat O-Ring Pressure water line resulting
in heavy mist.
Could damage main
diaphragm.
No control of output.
Replace o-ring, rebuilt
vacuum valve.
Other O-rings Vacuum leak, low output, no
output.
Water leaks out.
Replace.
Cracked Housing Vacuum leak or water dripping
from valve. Replace damaged
component.
Blockage Reduced output.
No output.
Clean.
Pilot Air
Regulator Damaged Diaphragm Loss in air pressure.
No air pressure.
Uncontrolled air pressure.
Repair.
Stuck Closed Or Open Unable to adjust pressure. Disassemble and clean.
Pilot Water
Regulator Damaged Diaphragm Loss in water pressure.
No water pressure.
Uncontrolled water pressure.
Repair.
Stuck Closed Or Open Unable to adjust pressure. Disassemble and clean.