Nortec Industries Electric Steam Humidifiers - Manual

Thank you for purchasing a NORTEC humidifier. Over thirty years
ago, we saw the need for a humidifier design that would end the
time-consuming and costly maintenance that was required by other
humidifiers. The main problem to overcome was to easily remove
the minerals that are left behind when water is boiled. At the
same time, a humidifier was needed to produce clean steam and
maintain long-term efficient operation.
The NORTEC electrode steam humidifier, with disposable cylinder,
meets all of the above criteria.
As clean steam is produced, the minerals that are in the water
remain in the steam generating cylinder and are periodically
removed through the automatic drain system. NORTEC’s patented
auto-adaptive control system is designed to produce 100% of rated
output capacity right up until end of cylinder life. At this time, the
cylinder is easily removed and replaced with a new clean cylinder.
While other humidifiers must be totally disassembled for cleaning
and require hazardous acids to remove the minerals, the cylinder in
your NORTEC humidifier is easily removed and replaced. Since the
cylinders are produced of inert plastics and retain only the water
borne minerals, disposal problems are at a minimum.
This ease of cleaning and cylinder replacement is one of the main
features that helps reduce customer maintenance costs. It allows
optimum service from the humidifier and keeps the time required
for maintenance to a minimum.
Low cost ▶
Clean ▶
Easy maintenance ▶
Au T hORIzEd Ag EN T
Remember to check
your cylinders regularly!
Cold & dRY winteRs = inCReased humidifieR demand