Numark Industries AXIS 9 - Manual (Page 30)

-18-
PROGRAM FUNCTIONS PLEASE READ!!!!
This button provides several programmable functions depending upon the
combination of buttons used.
Track Sequence Programming - Depress “PROG” while the unit is
stopped and “ ” will light. Select each track to be
programmed then press “PROG” between selections. Press
“PLAY/STUTTER” to start the track sequence program playing.
To exit and erase program hold “PROG” for more than 2 seconds
while the unit is stopped, open the disc tray, or turn off the
power.
The following functions will work by pressing “PROG” followed by appropriate
function while still holding the program button:
Effect Options - pressing program with an effect button will offer
alternative options to that effect. In the case of the “SCRATCH”
effect the display will toggle between Scratch 1,2,3, and 4. Not all
effects offer options. More information on these options is
available in the effects section of this manual.
End of track dead space elimination – this will give and option for
eliminating the dead space at the end of tracks. The unit already
automatically removes dead space at the beginning of tracks. End
of track dead space elimination is useful if you are playing a CD
continuously and want to eliminate all the gaps between songs.
The display will indicate “ ” when the function is set to
eliminate space and indicates “ “ when the unit is left to
leave the natural space between tracks. This setting will be
remembered at power down.
Cueing Style Selection – this will alternate the jog wheel cue
function from a smooth “scratch” sound to the tradition “stutter”
sound modes during cue operations. The display will indicate “
” when the “scratch” style is active. This indication
will go away when the style of cue is stutter. This setting will be
remembered at power down.
Brake Speed – this allows you to adjust the speed of “PAUSE”, or
braking. Press “PAUSE” then rotate the wheel until the desired
seconds of startup are shown. Pressing “PAUSE” twice will toggle
startup from “
” to the desired seconds.
Startup Speed – this allows you to adjust the startup speed of initial
play. Press “PLAY/STUTTER” then rotate the wheel until the
desired seconds of startup are shown. The “STUTTER” function
will not be affected. Pressing “PLAY/STUTTER” twice will toggle
startup between “
” and the desired seconds.