Numark Industries CDN90 User Manual

Manual, Premium cd player

Table of contents

Document Outline

SAFETY INSTRUCTIONS
DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.
USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE
- DOUBLE INSULATED - When servicing use only identical replacement parts
The NUMARK Product Development Team
- Control Unit Features
DISPLAY FEATURES
BASIC OPERATIONS
- ADJUSTING PITCH
  - The pitch changes automatically while the jog wheel is rotated. The faster you rotate the wheel the more you change.
- Key Change: Pressing and then or will change the key. The display will indicate the and the new key . The key can increase to 1 octave above normal key or up to 2 octaves above normal key when the Slide effect is used. The key can decrease up to 5 octaves below normal key. The display will limit to 19 half steps above or below normal key. If the key is higher, the display will show "H". If it is lower, the display will show "L".
EFFECT SELECTION (Multiple Effect Mode): In order to activate/deactivate this mode press PROG + HOLD. The display will indicate “MULTI” or “no MULTI”. Press an effect and move the wheel to the desired parameter. Then press a second effect. The first effect will flash while the current effect will be solid. To change effects, select the effect you want. To release, press the “current/solid” effect a second time. You can use a combined effect value of 4 effect values at the same time. This includes both sides added together. The values are with Scratch and Reverse being always possible. Phaze, Sonar, and Slide take 2 effect values and the remaining options require 1. If more than the allowed values are attempted, they will not activate.