Nokia 2170 - Manual (Page 52)

45
To call unlocked memory locations while
Auto Lock is on
There are four different ways you can do this:
1. Press and hold
ù
to go to the start screen. Press
W or V to desired unlocked location, then press
ó
.
2. Enter number as it is stored and press
ó
.
3. Press desired unlocked location (either 2, 3, or 4)
and press
ó
.
4. Press and hold the desired unlocked location.
To turn Auto Lock off
Use Menu 5 1 and your lock code
To change your lock code (Menu 5 2)
You can change your lock code with your phone’s menu.
It’s recommended that you change your code immediately
because the default lock code (1234) appears in this
owner’s manual. In a lock code, only characters 0 to 9, ∗
and # are accepted.
Changing the lock code is simple. Just press 0HQX 5 2 and
follow the prompts to do this. Make sure you have your
security code handy. You’ll need it to change the lock
code.
Note: Avoid entering access codes similar to emergency numbers
to prevent accidental emergency calls.
To change your security code (Menu 5 3)
The default security code for your phone is 12345. It’s
recommended that you change this code immediately.
Just press 0HQX 5 3 and follow the prompts to do this, and
make sure you write the new code down and store it away
from your phone.
Menu 5 4, Restrict Calls
This feature allows you to restrict outgoing calls from your
phone. You can select the level of restrictions through a
series of menu choices.