Nikon WT-1 - Manual (Page 11)

4
2 Before connecting the WT-1, set the USB option
in the camera setup menu to PTP.
1 Turn the camera on.
3 Turn the camera off.
5 Place the camera on the WT-1 and rotate the knob
in the direction shown to fasten the WT-1 to the
camera tripod mount.
4 Remove the cover protecting the camera power
contact. The cover can be stored in the housing
on the WT-1.
6 Open the camera USB connector cover and con-
nect the USB cable to the USB connector.
7 Pass the cable over the guide on the BL-2 battery-
chamber cover.
OK
USB
Mass Storage
PTP
SET UP
LOCK
POWER
LINK BUSY
POWER
LINK BUSY
LOCK
POWER POWER
Attaching the WT-1
LOCK
POWER POWER