Niles Audio RCA-TT - Manual (Page 9)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI
7
Additional
Flashers
REMOTE CONTROL ANYWHERE!
CONNECTION HUB
Additional
Flashers
REMOTE CONTROL ANYWHERE!
CONNECTION HUB
INSTALLATION
(CONTINUED)
STEP 4 – CONNECTING THE 12VDC IN-LINE POWER SUPPLY
AND MICROFLASHERS ®
Plug the MicroFlashers into any of the sockets labeled FLASHER OUTPUTS on the connection hub
(
Figure 5). Plug the connector on the supplied 12VDC power supply into the socket labeled POWER
on the connection hub and then plug the wall adapter into a live electrical outlet. The power LED
should light. If the LED does not light, confirm that the outlet you used is live by plugging in a lamp.
NOTE: MAKE ALL FINAL CONNECTIONS TO THE MSU BEFORE CONNECTING THE POWER SUPPLY. THIS
WILL AVOID POTENTIAL DAMAGE TO COMPONENTS.
INSTALLATION CONTINU
Figure 5: Connection Ports Figure 4: Installing Sensor Connector