Nexotek Callisto Spark NT-B300 - Manual (Page 20)

CHAPTER 4: CONNECTING YOUR GATEWAY 17
Connecting Your Gateway
Once you have Skype and SkyMagic up and running, you can connect your gateway. The
gateway has three different ports. Each one connects to a different outside source:
The LINE port connects to a landline phone jack in your home.
The TEL port plugs into your regular home phone.
The USB port connects to your computer.
Plugging in the gateway is a simple process. It should only take a few seconds. Please
have the USB cable and telephone cord that came with your NT-B300 ready.
1. Find the home phone that you want to double as a Skype phone. There should be
a telephone cord connecting it to a landline phone jack. Disconnect the cord at the
phone end and plug the cord into the gateway’s LINE port.
2. Take the telephone cord that was included in the package. Plug one of the ends –
it does not matter which one – into the port on the gateway labeled TEL. Then
plug the other end of the cord into the phone.