Nvidia N61S - Manual (Page 28)

- 2 -
nVIDIA N61P/N61S/N61V User's /Manual
・ OnChip USB
This option allows you to disabled the USB function or select the mode of USB.
・ USB Memory Type
Available options: [Base Memory (640K)] [Shadow].
・ USB Keyboard Support
This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS]
in OS environment.
・ USB Mouse Support
This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS]
in OS environment.
・ HD Audio
This item allows you to enable or disable the HD audio.
・ MAC Lan
Available options: [Disabled] [Enabled].
・ MAC Media Interface
Available options: [Disabled] [Enabled].
・ Machine MAC(NV) Address
Available options: [Disabled] [Enabled].
・ MAC(NV) Address Input
This is configurable only when “Machine MAC(NV) Address” is set to “Enabled”.
IDE HDD Block Mode
Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the
drive can support. It also improves the speed of access to IDE devices.
・ POWER ON Function
This item selects the way you want your system to power on.
[Password]: Use a password to power on the system, select this option then press
. Enter your password. You can enter up to 5 characters. Type in
exactly the same password to confirm, and then press .
[Hot KEY]: Use any of the function keys between to to power
on the system.
・ KB Power ON Password
If you select [Password],this function will be activation.
Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.
・ Hot Key Power ON
If you select [Hot Key], this function will be activation.
Available options: Ctr-F1~F12
・ Onboard FDC Controller
This option enables or disables the onboard FDC controller.
・ Onboard Serial Port 1
This item determines which I/O addresses the onboard Serial Port controller will access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an
I/O address for the onboard Serial Port.
[Disabled]: Disables the onboard Serial Port.
・ UART Mode Select
This item allows you to choose the routine IrDA protocol or ASKIR protocol. The IrDA
maximum speed is 115.2K bps; ASKIR maximum speed is 57.6K bps. Default setting is
Normal.
・ RxD , TxD Active
Active This items allows you set the transport speed of the IR devices.