Nvidia N61S - Manual (Page 23)

- 22 -
nVIDIA N61P/N61S/N61V User's /Manual
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Hard Disk Boot Priority
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Full Screen LOGO Show
Small Logo(EPA) Show
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[CDROM]
[Hard Disk]
[LS120]
[Enabled]
[Disabled]
[Enabled]
[On]
[Fast]
[Disabled]
6
250
[Setup]
Enabled
[1.4]
[Non-OS2]
[Enabled]
[Enabled]
Item Help
Menu Level
►
↑ ↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Enter
4.5.4 Advanced BIOS Features
・ Hard Disk Boot Priority
This item selects the hard disks booting priority. By pressing key, you can enter
its submenu where the hard disks detected can be selected for the booting sequence to
boot up system.
・ Virus Warning
Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempt to write data into this area, BIOS will
show a warning message on screen and alarm beep.
・ CPU Internal Cache
Enables or Disables the Level-1 Internal Cache memory.
Generally, this would only be Disabled for troubleshooting purposes.
・ External Cache
Enables or Disables the Level-2 External Cache memory.
Generally, this would only be Disabled for troubleshooting purposes.
・ Quick Power On Self Test
When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering
on the system. The BIOS shorten or skip some check during the POST.
・ First Boot Device/Second Boot Device/Third Boot Device/Boot Other Device
Select the drive to boot first, second and third in the [First Boot Device], [Second Boot
Device], and [Third Boot Device] items respectively. The BIOS will boot the operating
system according to the sequence of the drive selected. Set [Boot Other Device] to
[Enabled] if you wish to boot from another device other than these three items.