Northern Modular Telephone - Manual (Page 30)

• • • • 27 • • • •
Special features
Forced Camp-on
Forced Camp-on allows your telephone to automatically ring another telephone as soon as it
disconnects from its current call. Forced Camp-on allows both internal and external calls to be camped
on; Camp-on allows only external calls to be camped on.
Forced Camp-on may also be used with Priority Override. The combination of the two features is
referred to as Enhanced Override.
To use Forced Camp-on:
1. You dial a telephone number and hear a busy/engaged signal.
2. Press
£ to initiate a Forced Camp-on or dial the override FFC. If either of the persons
on the call disconnect at this time, you will hear an overflow (fast busy/engaged) signal.
3. The person you are calling hears a tone and you hear a ring/ringback signal or busy/engaged
signal, (depending on the options chosen). You are now camped-on.
4. When the person hangs up, both your telephone and their telephone ring.
5. Lift the handset or press a DN key or ©and begin speaking.
Group Hunt
If a call encounters a busy DN and a Group Hunting Pilot DN is specified, then the call is routed to the
next idle DN in a prearranged group.
1. Place a call to a DN in a pre-arranged group.
If the line is busy