Navman F10 - Manual (Page 71)

F10
71
ƒ Your computer will connect to the Internet and activate your Map Product Key.
ƒ When activation has completed, the map will change colour to amber; continue to step 7.
7. Click the map you want to install to your Navman.
The map will change colour to green to indicate it has been selected.
ƒ To deselect a map, click the map again.
Note: You may need to install multiple maps to cover the required geographical area.
8. Complete
the following:
If you want to ... Then ...
select an amber map go back to step 7.
select a red map the map needs to be activated via the Internet before it can be installed;
go back to step 5.
install the selected maps to your Navman continue to step 9.
9. Select the destination media for the selected maps, then click Transfer Now.
The selected maps will be installed and change colour to green .
10. To use your Navman, disconnect the USB cable.
WARNING Do not disconnect the USB cable from the Navman USB Socket until the installed map or maps have
changed colour to
green .