Install the hardware – NComputing X550 EN User Manual
Page 9
X550 User Guide
Page 9
Install the Hardware
Before attempting to install the X550 Kit, verify that your Windows or Linux OS is
supported by vSpace, and that the OS is properly installed, updated and all devices
viewable in the OS device manager are working properly. Also, check to be sure your
package includes one X550 PCI card, five XD2 devices, the vSpace installation CD, and
ten monitor mounting screws.
Install the X550 PCI Card
1. Disconnect all peripheral and power cables from the host PC.
2. Remove the host PC system cover.
3. Locate an available PCI slot for the X550 PCI card.