NetComm NB6PLUS4WN - Manual (Page 140)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
140 www.netcomm.com.au
APPENDIX A: CLIENT SETUP FOR 802.1X,
WPA, AND WPA-PSK
Retreiving Client Certificate
• This step is only required if you intend to authenticate with EAP/TLS.
While there are many ways you may receive a certificate from your Certificate Authority, the example here
is to show you how to retrieve your certificate from a Microsoft Certificate Services server via its easy
web interface.
1. Please connect the client to a network that doesn’t require port authentictaion.
2. Open up Microsoft Explorer, connect to your CA via the url http://yourserver/certsrv (see your local
administrator if it has been changed from the default).
For example, if the Microsoft Certificate Service server uses the IP address 192.168.0.2, then we have to
key in http://192.168.0.2/certsrv on the url box.
3. You will be asked to log in, use your domain credentials. (e.g., ABC)