Network Computing Devices Wireless Ethernet Adapter GW-EN11H - Manual (Page 7)

GeoWave GW-EN11H Wireless Ethernet Adapter User's Manual
7
2.Hardware Installation
Physical Details
Rear Panel
INIT Button “INIT” mean “Initiation”. While pressing the button, the adapter will
reboot and ERASE current settings, and restore to factory default
settings. The left indicator “DIAG” will be off and then begin
blinking. Then this initiation action will be completed when the
indicator “ DIAG” is always green instead of blinking.
LAN Cable
Selection Switch
X Crossover: the RJ-45 port Tx and Rx lines are
reversed. Use this setting when you have a straight
cable connected to PC. It is also the factory default
setting.
II
Straight: the RJ-45 port Tx and Rx lines are normal.
Use this setting when you have a crossover cable
connected.
Power Input Please only use the power adapter supplied
LAN Connection Use standard RJ-45 Ethernet cable to connect your PC, or any
Ethernet-ready device, such as printer server.
LAN Connection
Power Input
LAN Cable
Selection Switch
INIT Button