Niles Audio Niles ZR-4630 - Manual (Page 33)

Master Key/Source Button Events
When you press a Master Key on a Solo
™ Master Keypad Module or a Source Button on the hand held R-4
Remote, as many as four events occur.
The first event is factory programmed and activates the zone which you are located. The second event is fac-
tory programmed and selects the proper source input corresponding to the Master Key or Source Button pressed
(1 = Tuner, 2 = Input 2, 3 = Input 3, 4 = Input 4).
There are two installer programmable events available for Master Keys and Source Buttons 2, 3, and 4: Event
3 - the Source ON Event, and Event 4 - the Sequence Event.
Because there is no power command required for the ZR-4630’s internal tuner, Master Key 1 and the Tuner
Source Button are programmable only with the Sequence Event.
33
OPERATIONAL OVERVIEW
Master Key/
Source Button
Event 1
(Zone ON)
Event 2
(Input)
Event 3
(Source ON)
Event 4
(Sequence)
Master Key 1 or
Tuner Source Button
Turns Zone On
(Factory
Programmed)
Selects Tuner
(Factory
Programmed)
Not Available
Installer
Programmed
Master Key 2 or
Source Button 2
Turns Zone On
(Factory
Programmed)
Selects Input 2
(Factory
Programmed)
Installer
Programmed
Installer
Programmed
Master Key 3 or
Source Button 3
Turns Zone On
(Factory
Programmed)
Selects Input 3
(Factory
Programmed)
Installer
Programmed
Installer
Programmed
Master Key 4 or
Source Button 4
Turns Zone On
(Factory
Programmed)
Selects Input 4
(Factory
Programmed)
Installer
Programmed
Installer
Programmed
Event 1
This event turns a ZONE ON when a Master Key or a
Source Button is pressed. Pressing and holding a Master
Key/Source Button turns all zones on to that source (the
zone must be enabled via a DIP switch, see Installation
Settings for more details). When a zone is on, the select-
ed Master Key on the Solo™ illuminates green.
Event 2
This event selects the proper input for the Master
Key/Source Button pressed. The source selected for
Master Key 1 on the Solo™ Master Keypad Module, and
the Tuner Source Button on the R-4 Remote, is the inter-
nal Tuner. Master Keys/ Source Buttons 2, 3, and 4 are for
the external audio inputs respectively. These inputs are
selected every time a Master Key or a Source Button is
pressed or pressed and held.
Event 3
This event turns ON IR-activated source components (i.e.,
DSS, VCR) when a Master Key/Source Button is pressed.
The Source ON event occurs only for Master
Keys/Source Buttons 2, 3, and 4.
Power commands for
each Master Key/Source Button are programmed
individually and occur conditionally, synchronized via
the corresponding Sync Inputs.
Event 4
This event issues IR commands and programmed time
delays.
It is executed last and occurs every time a
Master Key/Source Button is pressed. Play, group, file,
or channel commands for an associated source component
typically are included in the sequence. The sequence for
Master Keys/Source Buttons 2, 3, and 4 can be pro-
grammed with the IR commands taught to their respective
function keys along with programmed time delays. The
sequence for the Tuner Source Key can be programmed
with the tuner’s direct access or preset access commands.