Niles Audio Niles ZR-4630 - Manual (Page 30)

30
Voltage Sync
Voltage Sync is also a reliable method of synchronization if chosen and implemented correctly. The Sync Inputs
can detect the control out voltage from a Niles Signal Sensing product interfaced to the source component.
Obtaining Voltage Sync
Current Sensing
Current Sensing synchronizes a component by detecting the changes in the AC power draw that occurs with
a component when it turns ON and OFF.
In Figure 19, a Niles APC-2 Current Sensing Switch senses the change in power consumption of a CD chang-
er when it is turned ON. When it senses that change, it outputs a 12V DC signal. The synchronized CD
changer’s AC power plug is connected to the current sensing outlet on the APC-2. The APC-2’s 12V DC out-
put is connected to the ZR-4630’s Sync Input dedicated to the CD changer using a Niles 10’ accessory cable
with bare wire to mini-plug (FG00724, see Accessories for more details).
When using a Niles APC-2, a minimum change of 30W is required for reliable current sensing. If the com-
ponent does not have a 30W change in current draw when turning ON (i.e., DSS receivers and most VCRs
and CD players), consider the last method, Light Sensing.
SOURCE POWER SYNCHRONIZATION
L
CD CHANGER
Niles APC-2
R
AUDIO
DIGITAL
Back
Front
Figure 19