Eizo COLOR EDGE CG222W - Manual (Page 9)

2. Installation
Priority setting Performance
1 If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was
Signal 2.
2 If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active input was
Signal 1.
Manual The monitor will not detect signals automatically in this mode. Select the
active input by pressing .
Note
• When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are
in power saving mode.