NordicTrack ASR 630 831.23765.0 - Manual (Page 10)

10
11. Orient a Link Arm (30) as shown. Identify the
Right Pedal (35), which is marked with an “R”
sticker. Attach the Right Pedal to the Link Arm
with three M8 x 45mm Button Screws (90), three
M8 Split Washers (97), and three M8 x 23mm
Washers (31).
Repeat this step for the Left Pedal (not
shown) and the other Link Arm (not shown).
11
35
31
31
97 97
90
30
10. Tip: Be careful not to pinch the wire har-
nesses during this step.
While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with
four M4 x 16mm Screws (78).
10
78
78
Console Wire
Harness
11
10
Avoid pinching the
wire harnesses
during this step
65