Nortel Networks Nortel IP Phone 1230 - Manual (Page 52)

Customizing your IP Phone 1230—basic features
52
Configuring the area codes
Use the Area Code Setup menu to save up to three area codes. When a
call arrives with an area code that matches one of the saved area codes,
the calling number is reordered to display the telephone number followed
by the area code (as opposed to the area code followed by the telephone
number).
This reordering applies when you scroll through your Callers List.
Use the following procedure to configure default area codes (maximum of
three).
5. Press the Select soft key to save the
configuration.
or
Press the Cancel soft key to keep
existing configurations.
1. Press the Services key, select
Telephone Options , and select Call
Log Options.
2. Press the Up or Down keys to scroll and
select Area Code Setup .
3. Press the Enter key.
or
Cancel Select
(Services)