Nokia 2116i - Manual (Page 58)

S e t t i n g s
57
The Network menu allows you to customize the way your device chooses a
network in which to operate while you are within or outside of your primary or
home system. Your device is set to search for the most cost-effective network. If
your device cannot find a preferred network, it selects a network automatically
based on the option you choose in the Network.
Roaming options
You can set your device to roam or search for another network when you are
not in your home area. These options are carrier dependent and may differ from
those described.
1. In the standby mode, select Menu > Settings > Network > Roaming options .
2. Select one of the following:
Home only —You can make and receive calls in your home area only.
Automatic —The device automatically searches for service in another digital
network. If one is not found, the device uses analog service. The roaming rate
applies when not in the home service area.
3. Press OK , if necessary, to confirm the activation.
■ Network services features
The following features are network services. See "Network Services," page 7.
Store a feature code
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting .
2. Enter the feature code from your service provider (for example, *900 to
activate Forward if busy ), and select OK .
3. Select Call forwarding .
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy ), and select Activate .
The activated feature code is now stored in your device, and you are returned to
the
Feature code: field. Continue entering other feature codes (for example, *900
to cancel Forward if busy ), or press the end key to return to the start screen.
When you enter a network feature code successfully, the feature becomes visible
in the
Network services menu.