Nokia 2190 - Manual (Page 38)

∗∗∗
creates a “p” (pause) of 2.5 seconds. When you
recall this number sequence from memory and press B
, the phone dials the phone number, and after the
call is answered, pauses 2.5 seconds, then sends the
DTMF digits. You can add as many “p” characters as
you need.
∗∗∗∗ creates a “w” (wait). When you recall this number
sequence from memory and press
B
, the phone
dials the phone number, and after the call is answered,
waits for you to press DTMF. This is handy if you are
calling a number that then prompts you to enter
information, such as your bank account number.
Touch Tone Settings in the Phone
Your phone’s Touch Tones settings are in Menu 4 5,
Auto DTMF Length. This determines the length of each
Touch Tone.
Short
Sets the DTMF tone
length to 100 ms.
Long
Sets the DTMF tone
length to 500 ms.
32